Filter
Top Products
7 - 2
7.1 Battery (Q6BAT)
7.1.2 Installation of Battery
7
BATTERY
7.1.2 Installation of Battery
The battery for the CPU module is shipped with its connector disconnected. Connect
the connector as follows.
Refer to Section 11.3 for the service life of the battery and how to replace the battery.
POINT
Firmly push the connector all the way.
Figure 7.1 Q6BAT battery setting procedure
Completed
Insert the battery connector into the
connector pin on the case. Be sure that
the insertion direction is correct.
Open the CPU module front cover.
Confirm that the battery is loaded
correctly.
CPU module
STOP
RESET
RUN
PULL
BAT.
BAT.
Connector