Filter
Top Products
12
Panel switch area
1
CONTROL switch
REMOTE
: For controlling the unit from the REMOTE
connector (9P).
LOCAL
: For controlling the unit using the controls
on its front panel.
EXT VTR
: For controlling an external VTR using the
controls on the unit’s front panel. The
VTR connected to the 9P connector of
VTR1 can be controlled using the control
system of VTR1.
<Note>
This switch is forcibly set to the LOCAL position in
the 625i mode.
2
PREROLL switch
Used to set the preroll time to 3, 5 or 7 seconds.
When the phase synchronization does not serve
the purpose or editing has failed or for other
reasons, the preroll time is automatically set to the
next longest setting. (If 7 seconds is set, this will
remain set as the preroll time.)
3
SYNCHRO switch
Used to set the phase synchronization and/or color
framing.
CF
: Phase synchronization and color framing are
performed.
ON
: Phase synchronization is performed but color
framing is not performed.
OFF
: Phase synchronization is not performed.
4
TAPE/EE switch
Used to select the signals which are output in the
stop, fast forward or rewind mode.
TAPE
: The signals played back from the tape are
output.
EE
: The input-switched input signals are output.
5
TC switch
REGEN
: The built-in time code generator is
synchronized to the time code selected by
the setup menu item No.570 (REGEN SEL)
setting.
R-RUN
: The time code advances only during
recording. (Presettable)
F-RUN
: The time code advances regardless of the
operation mode while the power remains
on. (Presettable)
6
REC INHIBIT switch
Used to select whether signals are to be recorded
on the cassette tape.
ON
: Recording on the cassette tape is inhibited. At
this time, the REC INH lamp in the display
tube lights.
OFF
: Recording on the tape is possible provided
that the accidental erasure prevention
mechanism on the cassette tape is at the
recording enable position.
Parts and their functions
CONTROL
REMOTE
LOCAL
EXT VTR
PREROLL SYNCHRO
7
5
3
CF
ON
OFF
REGEN
R-RUN
F-RUN
MODE
REC INHIBIT
TC
VTR 1
TAPE
EE
ON
OFF
REGEN
R-RUN
F-RUN
MODE
REC INHIBIT
TC
VTR 2
TAPE
EE
ON
OFF
ANALOG
OPERATION
MODE
EDIT
V2
VIDEO IN
SDI
ANALOG
SEPARATE
EXT
AUDIO
IN
V1-V2
V1
V2
OUT
2
CH
4
CH
2
CH
4
CH
INT
4 5 6 4 5 6321