Filter
Top Products
66
Audio cross channel editing
<Note>
Sound can be recorded on CH1 and CH2 channels
only.
Audio cross channel editing using the internal audio
memory can be performed by connecting an external
audio mixer.
$
Example of operation
Recording cross-faded audio signals onto CH2
Process 1
AJ-LT95
VTR1 VTR2
INPUT
A
INPUT
B
MIXER
CH1 OUT
MIXER
CH2 OUT
AUDIO
CH1 OUT
Internal
memory
AUDIO OUT
(CH1 or CH2)
AUDIO
CH2 IN
AUDIO
CH1 IN
Audio mixer
INPUT
A
INPUT
B
MIXER
CH1 OUT
MIXER
CH2 OUT
Audio mixer
1
2
Select CH2 as the setup menu item No.318 (AUD
MEM CH) setting.
3
Press the A1 and A2 buttons to turn on their lamps.
(CH1 and CH2 audio insert)
4
Set the edit points of VTR1 and VTR2.
5
Operate the audio mixer in such a way that the
VTR1 output signals (which are supplied to INPUT
A of the audio mixer) are output from the MIXER
CH1 OUT and MIXER CH2 OUT connectors.
(Turn down the input to INPUT B of the audio
mixer.)
6
Press the AUTO EDIT button to execute editing.
The same sound (VTR1 output) is insert recorded
onto CH1 and CH2 of VTR2. The same sound that
is recorded for about 20 seconds before the OUT
point is also stored in the internal memory at this
time.
IN
point
CH1
CH2
Internal memory
Approx.
20 sec
OUT
point
Select “INT_X” as the setup menu item No.317
(AUD MEM MODE) setting.
“m” now appears on the superimposed display of
VTR2. (See page 85)