Filter
Top Products
60
Split editing operations
With insert editing, an audio IN point can be set
slightly ahead of the video IN point. (Audio split
editing)
Similarly, a video IN point can be set slightly ahead of
the audio IN point. (Video split editing)
Slightly ahead of the video IN point.
(The audio IN point can also be placed
before the video IN point.)
Audio split editing (video reference)
VTR1
IN
point
Audio IN
point
Video recording
Audio recording
OUT
point
VTR2
Slightly ahead of the audio IN point.
(The video IN point can also be placed before
the audio IN point.)
Video split editing (audio reference)
VTR1
IN
point
Video IN
point
Video recording
Audio recording
OUT
point
VTR2
Split edit display lamp A SP or V SP
Split edit point setting display lamp
1
For audio split editing (video reference), select
“AUDIO” as the setup menu item No.375 (SPLIT
EDIT) setting; for video split editing (audio
reference), select “VIDEO.”
2
Turn on the video insert (V button).
3
Select the channels into which the audio signals
will be inserted using the A1 button, A2 button, A3
([SHIFT] + [A1]) button and A4 ([SHIFT] + [A2])
button.
5
Press the SPLIT button to light the LED above the
button.
6
Search the split IN point (audio IN point for audio
split editing or video IN point for video split editing)
in VTR1 or VTR2, and press the MARK IN button
to set the point.
The split edit point setting display lamp lights for
the VTR for which the split point was set, and the A
SP or V SP lamp lights.
7
Press the SPLIT button again.
The LED above the SPLIT button now starts
flashing to indicate that the split point has been set.
<Note>
When the DUR button is pressed while the LED above
the SPLIT button is lighted, the split amount is shown
on the counter display.
9
Press the AUTO EDIT button to execute editing.
(Alternatively, preview can be performed.)
8
Set the OUT point of VTR1 or VTR2.
(Alternatively, open-ended editing can be
performed.)
4
Set the IN points of VTR1 and VTR2.
With audio split editing, the video IN point is set;
with video split editing, the audio IN point is set.
The IN lamp of the edit point setting display lamps
lights.
<Note>
Steps
5, 6 and 7 can be skipped by pressing the
[SHIFT] + [MARK IN] button after step 4.
AV
SP
IN
OUT
IN
OUT