Filter
Top Products
COMSPHERE 6800 Series Network Management System
4-8 January 1997 6800-A2-GN22-30
Connecting the Third Full-Feature Workstation
To connect a third full-feature workstation, you will need to connect a UIP to the network hub unit
that you installed to connect the second full-feature workstation. The display unit and keyboard on
the UIP will serve as the third full-feature workstation. Figure 4-5 shows what the network will
look like with the UIP connected and serving as third full-feature workstation.
To connect the UIP to the network hub unit, you will need a modular cable (035-0116-5031).
Perform the following steps:
1. Connect the AUI adapter to the Ethernet card on the UIP.
2. Connect one end of the 035-0116-5031 cable to the jack on the AUI adapter.
3. Connect the other end of the 035-0116-5031 cable to a port on the network hub unit.
494-13900a-02
Host
Processor
Network Hub Unit
035-0116-5031
Ethernet
Card
Console/
Full-Feature
Workstation
Full-Feature
Workstation
User Interface
Processor
035-0116-5031
EtherLink II
Card
035-0116-5031
Console/
Full-Feature
Workstation
Ethernet
Card
Figure 4-5. Local Area Network with UIP