Filter
Top Products
COMSPHERE 6800 Series Network Management System
5-12 January 1997 6800-A2-GN22-30
The system prompts for the tape and floppy and asks:
Strike ENTER when ready or ESC to stop
PRESS: Enter
15. After the disk and tape are read, the following message appears:
Done reading tape...
16. The system continues:
TCP/IP Runtime Serialization
Enter your serial number or enter q to quit:
CAUTION
The serial number and activation key entered must be unique
across all TCP/IP nodes on the network to which the host is
connected. The TCP/IP daemon will shut down for both nodes
having equal serial number or activation keys.
TYPE: serial number from distribution package
PRESS: Enter
The system prompts:
Enter your activation key or enter q to quit
TYPE: activation key
PRESS: Enter
Several status messages appear and the system then prompts:
Enter the system node name or enter return to use [unix]:
NOTE
If you plan to use the default network configuration, you
must
enter
unix as the system node name and 1.1.1.1 as the internet address.
PRESS: Enter
to accept the default node name, or
TYPE: system node name
PRESS: Enter
The following messages appear:
TCP/IP Configuration Complete.
Altos TCP/IP Runtime installation complete.
The system displays the currently configured chains and then the following menu: