Filter
Top Products
Preparing the Processors
2-316800-A2-GN22-30 January 1997
Opening the System 15000
CAUTION
1. Make sure the ac power cord is not connected to the System
15000 before opening the computer and attempting to perform
any field installation activity.
2. To prevent static discharge that may damage the hardware,
wear a ground strap or otherwise ground yourself to the
chassis before opening the computer and installing any circuit
cards.
To open the Altos System 15000 and install circuit cards, perform the following steps:
1. Slide the top cover towards the rear of the chassis approximately .75I, as shown in
Figure 2-15, until the locking pins on the underside of the cover disengage. Lift the cover
straight up and set it aside.