Filter
Top Products
COMSPHERE 6800 Series Network Management System
5-56 January 1997 6800-A2-GN22-30
The system displays the current chains including the following:
2. altos_tcp -> en0
Select a chain to remove:
TYPE: 2
PRESS: Enter
The system prompts for confirmation:
Remove altos_tcp -> en0 (y/n):
TYPE: y
PRESS: Enter
The chain is removed; the existing chains are redisplayed followed by the menu of
available options. You need to reestablish the chain that was just removed.
TYPE: 1
PRESS: Enter
The system displays the top-level chain descriptions and prompt:
Select top level of chain to Add or q to quit:
TYPE: 1 (for altos_tcp)
PRESS: Enter
The system prompts:
Select next level of chain to Add or q to quit:
TYPE: 5 (or appropriate number for en0)
PRESS: Enter
The system prompts for confirmation:
Add chain altos_tcp -> en0 (y/n):
TYPE: y
PRESS: Enter
The system displays status messages and then requests:
Please enter the following information in order to configure en0
Enter the internet address of this interface:
TYPE: internet address
in the form nnn.nnn.nnn.nnn
Where: nnn is an integer from 1 to 255
PRESS: Enter
The system prompts:
Enter the netmask for this interface (default: 255.255.0.0):