Filter
Top Products
Loading and Restoring Software
5-496800-A2-GN22-30 January 1997
For a negative response, the following message appears:
The IPC-1600 ports card software driver will be removed from the system.
Continue? [y/n]:
To continue,
TYPE: y
PRESS: Enter
16. The system now rebuilds the kernel and installs device names. As this transpires, the
following message appears:
The kernel will now be rebuilt.
This will take a few minutes. Please wait.
Root for this system build is /.
Once the kernel is rebuilt, the following prompt appears:
Do you want this kernel to boot by default? (y/n):
TYPE: y
PRESS: Enter
17. The system back up the old UNIX and installs the new one. When this is done, the
following message appears:
Do you want the kernel environment rebuilt? (y/n):
TYPE: y
PRESS: Enter
18. The installation process is now complete. The following message appears:
The kernel has been rebuilt. Shutdown and reboot the system.
The installation of the 6800 NMS Application Volume 5 is now complete.
19. Remove the floppy disk and cartridge tape.
20. At the # pompt, to initiate a shutdown and automatically reboot the system, enter the
following commands:
TYPE: cd /
PRESS: Enter
TYPE: shutdown -g0 -y -i6
PRESS: Enter
If no further action is taken, the system boots up in multi-user mode. To speed up the
process,
PRESS: Ctrl-d
when prompted for normal start-up.