Filter
Top Products
COMSPHERE 6800 Series Network Management System
5-90 January 1997 6800-A2-GN22-30
Installing the Analysis Gateway Option (5000 Systems Only)
The ANALYSIS Gateway Option is supported by hardware and software. The IPC-900 serial card
must be installed in the host processor to support the physical link between the 6800 Series NMS
and the ANALYSIS NMS (see Chapter 2 for installation instructions).
The software that supports the ANALYSIS Gateway is embedded in the NMS application program
loaded on the host processor. The following procedure to initialize this software is presented in
three stages. The first stage involves installing and activating the software. The second stage
involves configuring the software with system parameters. The third stage involves setting
complimentary data rates on both the 6800 Series NMS and the ANALYSIS NMS. If, for any
reason, the NMS application program must be reinstalled, the installation of the ANALYSIS
Gateway must be repeated.
Installation
The installation procedure must begin with the NMS application stopped. Shut down the NMS
application as described in Chapter 6. The UNIX system remains active after the NMS shutdown
with a login prompt displayed.
NOTE
To cancel the installation at any time during the procedure, press the
Esc key.
1. Login, move to the installation directory, and initiate the installation program. At the login
prompt,
TYPE: root
PRESS: Enter
The system prompts:
Password:
TYPE: root password
PRESS: Enter
TYPE: cd /usr/nms/RNMS/Install/A6510
PRESS: Enter
TYPE: ./Install
PRESS: Enter
2. The install script scans for th availability of interrupts, I/O addresses, and memory
addresses. The system displays the message:
Installing NMS Multiple ANALYSIS 6510 support....
Searching for available interrupts...
Searching for available starting addresses....
Searching for available starting controller memory addresses...