Filter
Top Products
COMSPHERE 6800 Series Network Management System
3-12 January 1997 6800-A2-GN22-30
Fujitsu DX2300
The Fujitsu DX2300 is a dot matrix printer that communicates with the host processor through a
serial interface. Modifying its default settings is done directly on the memory and serial interface
cards. To modify the default settings, perform the following steps:
1. Remove the printer from its carton and set it on a flat surface.
2. Loosen the card cover bolt, and then move the paper release lever forward and remove the
card cover, as shown in Figure 3-6.
3. Locate the memory card and serial interface card. The memory card is found in the second
slot of the printer card chassis and the serial interface card in the first slot.
Figure 3-6. DX2300 — Memory and Serial Interface Card Access