Filter
Top Products
Loading and Restoring Software
5-796800-A2-GN22-30 January 1997
The Setup Program prepares your system with Proteon LAN Support Program device
drivers. The necessary CONFIG.SYS statements are automatically created in a file
called CONFIG.LSP
Setup allows you to update your CONFIG.SYS file. Each screen contains instructions
for configuring your software and hardware.
To accept Setup’s default, press ENTER.
To change Setup’s default, type over the default value.
You can use ESCAPE at any time to return to a previous screen.
You may use CNTL-C to exit Setup at major decision points.
Press ENTER to continue . . .
PRESS: Enter
7. The system prompts for a destination directory; accept the default, C:\PROTEON, and
PRESS: Enter
8. The system prompts:
Will you be running a 3270 Program?
Using the ↓↑ keys, select no and
PRESS: Enter
9. The system prompts:
Will you be running a NETBIOS application?
Using the ↓↑ keys, select no and
PRESS: Enter
The system displays a confirmation window for all values selected.
You have made the following selections:
LSP software directory C:\PROTEON
3270 Application Usage: No
NETBIOS Application Usage: No
Satisfied with your selections?
Press ENTER to continue; ESCAPE to change selections
If any value is not correct,
PRESS: Esc
The system requests entry again, starting from Step 7.
If the values are correct,
PRESS: Enter