Filter
Top Products
Preparing the Processors
2-456800-A2-GN22-30 January 1997
Running CMOS Setup on the Altos 15000
Once the circuit cards are configured and installed, the system date and time and memory ranges
for add-on cards should be set. This procedure requires the system to be restarted using the
following steps:
1. Power on the system and repeatedly
PRESS: Ctrl-Alt-Esc
2. The BIOS Setup Utility menu appears. Using the ↓↑ keys, select System Configuration
Setup and
PRESS: Enter
PRESS: Page Down
3. Page 1 of the System Configuration will appear. Using the ↓↑ keys, select the correct date
and time.
4. Page 2 of the System Configuration appears. At the bottom of the page is a field, Memory
0F00000H:0FFFFFFH. Using the ←/→ keys, change the value System to Add-on Card.
PRESS: Esc
5. A confirmation box appears; to save the CMOS data,
PRESS: Enter
6. The main BIOS Setup Utility menu appears.
PRESS: Esc
7. The system automatically reboots.