Filter
Top Products
Loading and Restoring Software
5-776800-A2-GN22-30 January 1997
NOTE
For the 15000 platform, the division of full-feature workstations
among the three processors should be:
Host Uip-1 Uip-2
7314
Configurations with lower numbers of full-feature workstations
should retain equivalent ratios among the processors for best
performance.
4. If the workstation is connected to the NMS host processor and while still in the XONE
directory:
TYPE: copy HOST.CFG XONE.CFG
PRESS: Enter
5. If the workstation is connected to an NMS UIP and while still in the XONE directory:
TYPE: copy UIP.CFG XONE.CFG
PRESS: Enter
6. TYPE: edit XONE.CFG
PRESS: Enter
The DOS editor displays the XONE.CFG file. You should look for the line which starts
with CONN_COMMAND and change WSNAME to the name of the workstation. Look
for the line beginning with CONN_HOST and change NMSHOST to the name of the host
machine if you are connected to the host or to the name of the UIP machine if you are
connected to the UIP. Save the file and exit the editor.
7. If not installing the Token Ring package, do the following steps. If you are installing the
Token Ring package, continue with the next section, Installing the Token Ring Software on
the Full-Feature Workstation.
TYPE: cd . .
PRESS: Enter
TYPE: edit autoexec.bat
PRESS: Enter
The DOS editor displays the file. At the end of the file add the following line:
C:\XONE\PACKET\STARTPKT
Save the file and exit the editor program.
8. Reboot the processor to ensure that all changed parameters are properly loaded.