Filter
Top Products
Loading and Restoring Software
5-936800-A2-GN22-30 January 1997
9. The system displays the following prompt:
Do you want the kernel to boot by default? (y/n):
TYPE: y
PRESS: Enter
10. The system displays the following prompt:
Do you want the kernel environment rebuilt? (y/n):
TYPE: y
PRESS: Enter
11. Shut down and reboot the system:
TYPE: cd /
PRESS: Enter
TYPE: shutdown -g0 -y -i6
The command will shutdown and reboot the system.
NOTE
If you are migrating a database to Release 4.2, you must perform
the migration before configuring your ANALYSIS network on NMS.
Configuration
After the ANALYSIS Gateway software is installed, the NMS application program must be started,
and then the configuration data can be entered. After the data is entered, the NMS system must be
rebooted.
1. After the ANALYSIS Gateway software is initialized the UNIX # prompt appears. At this
prompt,
TYPE: su \M nms
PRESS: Enter
2. The Network Management System Menu appears. Select Start the system,
TYPE: 1
PRESS: Enter
3. When prompted to continue,
PRESS: Enter