Filter
Top Products
Appendix D Spectrometer Adapters 153
SPEX TripleMate (NTE with or without shutter)
1
2
6
5
4
7
3
Qty P/N Description
1. 1 2518-0184 Adapter-Male, LN/TE, CCD/For Spex TripleMate
2. 4 2826-0128 Screw, 10-32 × 5/8, Socket Head Cap, Stainless Steel,
3. 1 2517-0163 Slit Mount, Spex
4. 4 2826-0129 Screw, 1/4-20 × 3/4, Socket Head Cap, Stainless Steel
5. 3 2826-0127 Screw, 10-32 × 1/4, Button Head, Hex, Stainless Steel
6. 1 2518-0185 Adapter-Female, Flange Spex
7. 2 2826-0082 Set Screw, 10-32 × 1/4, Stainless Steel, Allen Hex, Ny
lon Tip
1 2500-0025 O-ring, 2.359x.139, Viton (installed)
1 2500-0026 O-ring, 2.484x.139, Viton (installed)
Assembly Instructions
1. Mount the whole assem
bly onto the spectrometer.
2. Loosen setscrews and pull out part 1 far enough to enable access to screws with Allen
wrench. Do not pull part 1 past the O-ring (If y
ou do pull out part 1 completely,
reinsert before attaching the camera).
3. Attach part 3 to the cam
era with the three (3) 1/4" long button head screws provided.
4. Tighten the setscrews.
Note: Adapter parts are machined to provide a tight fit. It is necessary to rotate the camera
back and forth when inserting into the spectrometer adapter. Do not force the two parts of
the adapter together, as they can be permanently damaged by excessive force.