Filter
Top Products
Programming6-28
Condensed Print
ASCII Hex Decimal
P-Series See
Comment.
Serial SI 0F 15
ESC SI
1B 0F
27 15
Purpose
Selects 17 characters per inch (cpi) condensed print format.
Comment Condensed print can be selected using P-Series control code SFCC X or by
Serial Matrix control code ESC X. Refer to Print Mode/Pitch Selection on
page 6-58.
The Serial Matrix condensed print control code SI affects all subsequent
characters.
After receiving code SI, all characters will be printed in condensed
print until reset by ESC M, ESC P, the condensed print reset control code
DC2, printer reset, or a new print mode control code. The Serial Matrix SI
code (hex 0F) is equivalent to the ESC SI code. If condensed print is not alĆ
lowed
in the current print mode, the code is ignored.
Example The following sample program illustrates condensed character printing and
reset.