Filter
Top Products
9-10 RibbonMinder
2. Reset for New Ribbon
Press ENTER to reset for a new ribbon. The display message will indicate CHANGE
RIBBON.
RIBBON LIFE
CHANGE RIBBON
100%
3. Install New Ribbon
Install a new ribbon and press CLEAR to clear any fault conditions that occurred while
changing
the ribbon.
OFFLINE
READY
100%
4. Continue Printing
Continue printing the interrupted job by placing the printer ON LINE.
5. Change Ribbon Size
If the new ribbon is a different size, refer to the Running a Job on page 9-5 for instrucĆ
tions
on how to change the ribbon size.
Host Control
The RibbonMinder function can be controlled by host interface using the following control
code sequences. Additional information and a program example is provided in the ProgramĆ
ming
chapter.
NOTE:
If your printer is in Serial Matrix emulation, substitute ESC for the Special F
uncĆ
tion
Control Character (SFCC) being used.