Filter
Top Products
4-9Graphics
3. Send
the odd dot plot control code ENQ (05 hex) and a
second line of data, followed by a
line
terminator.
a. A
line feed (0A hex) used as the line terminator causes the contents of the buffer to
be plotted and the paper advances a single dot row, based on the vertical density of
the
current mode. A CR (if CR = CR + LF is configured) may also be used with
the
same
result.
b. A
form feed (0C hex) used as the line terminator causes the data bytes to be plotted
and
the paper to advance to the
top of the next form.
4. Regardless
of
which line terminator code is sent, the printer will default to the previously
selected
print mode unless further plot control codes are provided with the data.
NOTE
: F
ailure to adhere to this format may cause unexpected results.