Filter
Top Products
11-3Installation
Figure 11-1. Site Requirements
Shipping Restraints
During
shipping, the printer mechanism is protected
by foam packing and removable tie wraps
which secure the Forms Thickness Adjustment Lever, Paper Guide, Front Paper Fence, and
Paper Tent. Remove the foam packing and tie wrap restraints as described below, referring to
Figure 11-2.
- WARNING -
To
prevent possible injury
, do not connect the AC power source before removing the
shipping restraints. If the power source has already been connected, disconnect it
before performing the shipping restraint removal procedures.
- WARNUNG -
Um mögliche Verletzungen zu vermeiden, darf die Netzverbindung erst nach dem
Entfernen der Transportbefestigungen hergestellt werden.
Shipping Restraint Removal
1. Swing open the left and right tractor gates (A) and remove the foam pad from the paper
path
in front of the platen.
2.
Using the press-release tabs, remove the tie-wrap restraints:
a.
Securing the F
orms Thickness A
djustment L
ever (B).
b.
Securing the P
aper Guide (C).
c. Open the rear printer door and remove the tie-wraps securing the Front Paper
Fence
(D) to the cabinet frame.
d.
Securing the P
aper T
ent (E) to the F
ront P
aper F
ence (D).