Filter
Top Products
Chapter 7: User Management
118
2. Click Delete.
3. When prompted to confirm the deletion, click OK.
Important: ACL rules are evaluated in the order in which they are
listed. For instance, in the example shown here, if the two ACL
rules were reversed, Dominion would accept no communication at
all.
Tip: The rule numbers allow you to have more control over the order in
which the rules are created.
Note: Both IPv4 and IPv6 addresses are supported.
Modifying an Existing User Group
Note: All permissions are enabled (and cannot be changed) for the
Admin group.
To modify an existing user group:
1. From the Group page, change the appropriate fields and set the
appropriate permissions.
2. Set the Permissions for the group. Select the checkboxes before the
permissions you want to assign to all of the users belonging to this
group. See Setting Permissions.
3. Set the Port Permissions. Specify the server ports that can be
accessed by users belonging to this group (and the type of access).
See Setting Port Permissions (on page 115).
4. Set the IP ACL (optional). This feature limits access to the KX II
device by specifying IP addresses. See Group-Based IP ACL
(Access Control List) (on page 116).
5. Click OK.
To delete a user group:
Important: If you delete a group with users in it, the users are
automatically assigned to the <unknown> user group.