Filter
Top Products
Appendix D: FAQs
314
It depends on the bandwidth and latency of the Internet connection
between your remote client and the KX II. With a cable modem or high
speed DSL connection, your performance can be very similar to a
LAN/WAN connection. For lower speed links, use the suggestions
above to improve performance.
I have a high bandwidth environment. How can I optimize
performance?
The default settings will provide strong performance in a high bandwidth
environment. Ensure that the connection speed is set to 100Mb or 1Gb
and the color depth is set to15 bit RGB Color.
What is the maximum remote (over IP) video resolution supported?
The KX II is the first and only KVM-over-IP switch to support full High
Definition (HD) remote video resolution – 1920x1080.
In addition, popular widescreen formats are supported, including
1600x1200, 1680x1050 and 1440x900, so remote users can work with
today‟s higher resolution monitors.
What about servers with DVI ports?
Servers with DVI ports that support DVI-A (analog) and DVI-I (integrated
analog and digital) can use a simple, passive adapter such as the
ADVI-VGA to convert the DVI port to a VGA plug that can be connected
to a KX II CIM‟s VGA plug.
Servers with DVI ports that only support DVI-D (digital) would need a
more expensive adapter, but customers should check to see if the
server‟s video card can be configured to support DVI-I or DVI-A.