Filter
Top Products
Chapter 8: Device Management
160
8. Click OK.
Configuring KVM Switches
The KX II also supports use of hot key sequences to switch between
targets. In addition to using hot key sequences with standard servers,
KVM switching is supported by blade chassis and in tiered
configurations.
Important: In order for user groups to see the KVM switch that you
create, you must first create the switch and then create the group. If
an existing user group needs to see the KVM switch you are creating,
you must recreate the user group.
To configure KVM switches:
1. Choose Device Settings > Port Configuration. The Port Configuration
page opens.
2. Click the Port Name of the target server you want to rename. The
Port Page opens.
3. Select KVM Switch.
4. Select the KVM Switch Model.
Note: Only one switch will appear in the drop-down.