Filter
Top Products
Chapter 1: Introduction
5
Related Documentation
The KX II help is accompanied by a KX II Device Quick Setup Guide,
which can be found on the Raritan Firmware and Documentation page
http://www.raritan.com/support/firmware-and-documentation/ of
Raritan's website.
Installation requirements and instructions for client applications used with
the KX II can be found in the KVM and Serial Access Clients Guide,
also found on the Raritan website. Where applicable, specific client
functions used with the KX II are included in the help.
KX II Client Applications
The following client applications can be used in the KX II:
Product
Works with...
MPC
RRC
VKC
RSC
AKC
KX II (Generation 2)
KX II 2.2 (or later)
See the KVM and Serial Client Guide for additional information on the
client applications. Also see the Working with Target Servers (on page
37) section of this guide, which contains information on using the clients
with the KX II.
Note: MPC and VKC require the Java
™
Runtime Environment (JRE
™
).
AKC is .NET based.