Filter
Top Products
Chapter 8: Device Management
174
Note: Leave the username and password fields blank for DRAC, ILO,
and RSA web applications or the connection will fail.
e. The Username Field and Password Field, which are both
optional, contain the labels that are expected to be associated
with the username and password entries. It is in these fields you
should enter the field names for the username and password
fields used on the login screen for the web application. You can
view the HTML source of the login screen to find the field names,
not the field labels. See Tips for Adding a Web Browser
Interface (on page 178) for tips on adding a web browser
interface.
5. USB profiles do not apply to Dell chassis.
6. Click OK to save the configuration.
IBM Blade Chassis Configuration
See Supported Blade Chassis Models (on page 181), Supported
CIMs for Blade Chassis (on page 182), and Required and
Recommended Blade Chassis Configurations (on page 184) for
important, additional information when configuring the blade chassis.
1. Connect the blade chassis to the KX II. See Step 3: Connect the
Equipment for details.
2. Select Device Settings > Port Configuration to open the Port
Configuration page.
3. On the Port Configuration page, click on the name of the blade
chassis you want to configure. The Port page will open.
4. Select the Blade Chassis radio button. The page will then display the
necessary fields to configure a blade chassis.
5. Select the IBM
®
blade chassis model from the Blade Server Chassis
Model drop-down.
To configure a IBM BladeCenter H and E:
1. If you selected IBM BladeCenter
®
H or E, auto-discovery is available.
Configure the blade chassis as applicable. Prior to configuring a
blade chassis that can be auto-discovered, it must be configured to
enable SSH connections on the designated port number (see Device
Services (on page 140)). Additionally, a user account with the
corresponding authentication credentials must be previously created
on the blade chassis. The KX II only supports auto-discovery for
AMM[1].
a. Switch Hot Key Sequence - Predefined.
b. Maximum Number of Slots - The default maximum number of
slots available on the blade chassis is automatically entered.