Filter
Top Products
Chapter 13: KX II Local Console
244
Local Console Smart Card Access
To use a smart card to access a server at the Local Console, plug a USB
smart card reader into the KX II using one of the USB ports located on
the KX II. Once a smart card reader is plugged in or unplugged from the
KX II, the KX II autodetects it. For a list of supported smart cards and
additional system requirements, see Supported and Unsupported
Smart Card Readers (on page 275) and Minimum System
Requirements (on page 276).
When mounted onto the target server, the card reader and smart card
will cause the server to behave as if they had been directly attached.
Removal of the smart card or smart card reader will cause the user
session to be locked or you will be logged out depending on how the
card removal policy has been setup on the target server OS. When the
KVM session is terminated, either because it has been closed or
because you switch to a new target, the smart card reader will be
automatically unmounted from the target server.
To mount a smart card reader onto a target via the KX II Local
console:
1. Plug a USB smart card reader into the KX II using one of the USB
ports located on the device. Once attached, the smart card reader
will be detected by the KX II.
2. From the Local Console, click Tools.
3. Select the smart card reader from the Card Readers Detected list.
Select None from the list if you do not want a smart card reader
mounted.
4. Click OK. Once the smart card reader is added, a message will
appear on the page indicating you have completed the operation
successfully. A status of either Selected or Not Selected will appear
in the left panel of the page under Card Reader.