Filter
Top Products
Chapter 7: User Management
130
Note: Both IPv4 and IPv6 addresses are supported.
Cisco ACS 5.x for RADIUS Authentication
If you are using a Cisco ACS 5.x server, after you have configured the
KX II for RADIUS authentication, complete the following steps on the
Cisco ACS 5.x server.
Note: The following steps include the Cisco menus and menu items used
to access each page. Please refer to your Cisco documentation for the
most up to date information on each step and more details on performing
them.
Add the KX II as a AAA Client (Required) - Network Resources >
Network Device Group > Network Device and AAA Clients
Add/edit users (Required) - Network Resources > Users and Identity
Stores > Internal Identity Stores > Users
Configure Default Network access to enable CHAP Protocol
(Optional) - Policies > Access Services > Default Network Access
Create authorization policy rules to control access (Required) -
Policy Elements > Authorization and Permissions > Network Access
> Authorization Profiles
Dictionary Type: RADIUS-IETF
RADIUS Attribute: Filter-ID
Attribute Type: String
Attribute Value: Raritan:G{KVM_Admin} (where KVM_Admin is
group name created locally on Dominion KVM Switch). Case
sensitive.
Configure Session Conditions (Date and Time) (Required) - Policy
Elements > Session Conditions > Date and Time
Configure/create the Network Access Authorization Policy
(Required) - Access Policies > Access Services > Default Network
Access>Authorization