Filter
Top Products
26 PARAGON ADMINISTRATOR’S INSTALLATION AND OPERATION GUIDE
Important: Repeat the steps on the previous pages:
Connect Z-Series Z4200U Z-CIMs as a Tier
Perform Channel Configuration
Name the Computer Channel on the Z4200U tiered Selection Menu
Verify and Save Changes
for each server to be added to the chain. Name and test each computer as it is added.
Follow the steps below to build the rest of the Z4200U chain of servers.
Attach Z4200U Z-CIM to Computer to be Added:
For UKVMSPD Z-CIM:
1. Connect the 6-pin mini-DIN keyboard and mouse and HD15 video connectors on the
UKVMSP Z-CIM to computer’s keyboard, mouse, and video ports.
Figure 21 Z-CIM UKVMSPD
For UKVMSC Z-CIM with local port:
1. Connect CCPnn cable’s 6-pin mini-DIN and HD15 connectors to computer’s keyboard,
mouse, and video ports.
2. Connect DB25 male end of CCPnn cable to DB25 female port on back of Z-CIM (UKVMSC).
Figure 22 Z-CIM UKVMSC with Local Port
Attach new Z-CIM to the existing Z4200U chain:
1. Remove Z-CIM Terminator from the last Z-CIM’s UTP IN port and set aside.
2. Connect a Category 5e UTP cable to UTP IN port on the Z-CIM that is currently last in the
chain.
3. Connect the other end of this Category 5e UTP cable to the UTP OUT port on the next Z-
CIM/computer currently being added to the chain.
4. Place the Z-CIM Terminator in the added Z-CIM’s UTP IN port.
5. Power ON computer.