Filter
Top Products
78 PARAGON ADMINISTRATOR’S INSTALLATION AND OPERATION GUIDE
Uploading a Configuration File to Your System
After any user profile, computer, and/or other device has been modified, the new configuration file
must be uploaded to the UST1 to reconfigure the system. Before uploading to the UST1, save a copy
in a PC disk file for later reference.
• Click on the Send File to Paragon button in the Communication Control Panel. The program
will upload the new configuration file to the UST1 unit. During this upload, the unit’s operation
will be temporary suspended.
• To configure other UST1s, use Refresh Configurations (Item 5 on the Administration Menu).
Downloading a Configuration File from UST1
This feature allows you to update the configuration file on the PC if maintenance has been performed
on the system from a user station.
• Click on the Reload Configuration File from Paragon button in the Communication Control
Panel to download a copy of the configuration file from the UST1. This will override any
currently stored configuration file on the PC.
Opening a Saved Configuration File from a PC Disk File
• Select Open from the File menu in the Overview program window to open a copy of a
previously saved configuration file from a PC disk file.
• Click on the Send File to Paragon button in the Communication Control Panel to upload this
copy of the configuration file to the connected UST1 unit.