Filter
Top Products
CHAPTER 2: INSTALLATION 29
12. Repeat these channel configuration steps for each path. You must name all MX4 paths with
the same name. This will notify Paragon that these paths are connected to the same MX4.
13. Press <S> to save the new configuration.
Verify and Save Changes:
1. Press <F2> to go the Selection Menu to validate that the second-tier MX4 is properly
established. All MX4 paths should be displayed in purple.
2. Press <F5> to go to the Administration Menu and select the Channel Configuration submenu.
Select a channel that has been configured for MX4. Press <G> to bring up a Channel
Configuration menu for the MX4. Edit the computer names.
3. Press <S> to save the new configuration.
4. Press <F2> to go to the Selection Menu to validate that second-tier MX4 is properly
configured. Select one MX4 channel, then press <Enter> to go to MX4 selection menu. Select
one MX4 channel and press <Enter>. Verify proper access to selected computer.