Filter
Top Products
32 PARAGON ADMINISTRATOR’S INSTALLATION AND OPERATION GUIDE
For MXU2 User 2 (Remote Category 5e UTP Port):
a. Connect the other end of the Category 5e UTP cable to the RJ45 User 2 port on the back of
the MXU2.
Perform Channel Configuration:
1. At the User Station Login Menu, type “admin” in the User Name field and press <Enter>.
2. Type “raritan” (all lowercase) in the Password field and press <Enter>.
3. Press <F5> to go the Administration Menu and select the Channel Configuration submenu.
4. Use the <Ç> and <È> or the <Page Up> and <Page Down> keys to select the channel where
MasterConsole MXU2 is connected.
5. Press the <Tab> key to advance to the Device field, then press <Enter> - the highlight turns
green.
6. Use the <Ç> and <È> keys to change the device type to a MasterConsole MXU2 (MXU28 or
MXU216).
7. Hold the <Shift> key and press <Tab> to go back to the Name column.
8. Press <Enter> and edit the default name.
9. Press <S> to save the new configuration.
Verify and Save Changes:
1. Press <F2> to go to the Selection Menu to validate that second-tier MasterConsole MXU2 is
properly configured. Select and switch to one of the MasterConsole MXU2 channels to
ensure proper switching.
2. Press <F5> to go to Administration Menu. Select Channel Configuration submenu. Select
the MasterConsole MXU2 channel. Press <G> to bring up a Channel Configuration menu of
the MasterConsole MXU2. Edit names.
3. Press <S> to save the new configuration.