Filter
Top Products
CHAPTER 3: OPERATING PARAGON 59
2. Display Ver./SN (Firmware Version and Serial Number): Displays current version of firmware
and unit’s serial number.
FIRMWARE: 2C1
SN: CPB80347
Figure 48 Display Ver. and SN
3. Test User UST1 (User Station): Used by administrator to check if user stations (UST1s) are
functioning properly. Press the [] or [] button to change user port number. Display will read
“OK”, “None”, or “Failed. Press [ESC] to return to normal display.
If a “failed” condition is detected, make sure Category 5e UTP cable is installed properly and
secured, or try using another UST1 to see if UST1 under test has become defective.
TEST USER UST1
UST1: 3 OK
Figure 49 User Station Test
4. Test Channel UKVM (CIM UKVM)
: Used by administrator to check if Computer Interface
Module (CIM) is functioning properly. Press the [] or [] button to change channel number.
Display will read “OK”, “None”, or “Failed”. Press [ESC] to return to normal display.
If a “failed” condition is detected, make sure Category 5e UTP cable is installed properly and
secured, or try using another CIM (UKVM) to see if CIM under test has become defective.
TEST CHAN. UKVM
UKVM: 60 OK
Figure 50 Channel CIM (UKVM) Test
5. Set Bank ID: Press the [] or [] button to ensure that Bank ID is set at “1”. Press [ESC] to
return to normal display.
SET BANK ID
B
ANK: 1
Figure 51 Set Bank ID