Filter
Top Products
58 PARAGON ADMINISTRATOR’S INSTALLATION AND OPERATION GUIDE
Function Selection Screen:
Several administrative functions can be performed on the Function Selection Screen on the Paragon
switch’s front panel.
Set LCD Contrast
Display Ver./SN
Test User UST1
Test Chan. UKVM
Set Bank ID
Re-Configure
Reset UMT8 Switch
Figure 45 LCD Functions
Selecting a Function:
Press the [FUNC] button on the front panel of the Paragon Switch to enter Function Selection mode
and use the [] and [] buttons to scroll through the Function List. Press the [ENT] button on the
front panel to select displayed function and use the instructions below for each specified function.
Press the [ESC] button on the front panel at any time to return to Normal Display.
FUNCTION MENU
D
ISPLAY VER./SN
Figure 46 Function Selection
1. Set LCD Contrast: Modifies contrast level of front panel LCD Display. Press the [] or []
button to increase or decrease contrast, and press the [ESC] button to return to normal display.
S
ET LCD CONTRAST
U
SE UP/DOWN KEYS
Figure 47 Set LCD Contrast
Note: LCD contrast can also be adjusted by holding the [] button and pressing the
[] or [] button at any time.