Filter
Top Products
Configuring the Controller using the Switches
178 AX3500 Motor Controller User’s Manual Version 1.9b. June 1, 2007
Restoring factory defaults
Should you, for any reason, require to reset the AX3500 controller to its factory default
value, press and hold the Program and Set button together for 10 seconds while resetting
the controller. All parameters, including Joystick limits, will be reset to their default values
shown in the “Programmable Parameters List” on page 178
Exiting the Parameter Setting Mode
Exiting the Programming Mode can be done only by pressing the Reset button or powering
down the controller. The new parameters will be the ones in use after the controller is
reset or first powered up.
Programmable Parameters List
The following table shows the AX3500’s controller parameters in the order they appear
during programming, as well as their valid values.
Important Notice
The parameter table below is guaranteed to be accurate only if the controller soft-
ware version number matches the one of this manual. See “Obtaining the Control-
ler’s Software Revision Number” on page 23 for instructions on how to find this
number.
This manual is for software version 1.9b
If the controller has a more current software revision, please download an updated version
of this manual from the Roboteq web site at www.Roboteq.com.