Filter
Top Products
118 Enterprise Fabric Suite 2007 User Guide • September 2008
FIGURE 5-8 Port Threshold Alarm Example
7. Enter a sample window in seconds. The sample window defines the period of
time in which to count events.
8. Repeat steps 3 through 7 for each alarm you want to configure or enable.
9. Click the OK button to save all changes.
Paging a Switch
You can use the beacon feature to page a switch. The beacon feature causes all
Logged-In LEDs to flash, making it easier to recognize. To page a switch, open the
Switch menu in the faceplate display and select Toggle Beacon. To cancel the beacon,
reselect Toggle Beacon.
Rising
Trigger
Falling
Trigger
Event
Count
Sample Window
Generate falling
trigger alarm;
eligibility is reset
Generate rising
trigger alarm;
eligibility ends
Generate rising
trigger alarm;
eligibility ends