Filter
Top Products
Chapter 2 Managing Fabrics 47
FIGURE 2-7 FC Ping Dialog
To verify a Fibre Channel connection, do the following:
1. Open the Switch menu and select FC Ping to open the FC Ping dialog.
2. Open the Destination drop-down list and select a destination port.
3. Select the Port WWN or Port Address option.
4. In the Repeat area, use the arrow keys to select or type in a value (between 1-100)
for the number of FC ping attempts to perform.
5. In the Timeout area, select the number of seconds to continue attempting the FC
ping operation before timing out. Click and drag the slide bar to move the slide
bar.
6. Click the Ping button, and view the results in the text window.
FC TraceRoute Dialog
The FC TraceRoute dialog (FIGURE 2-8) allows you to map the route trip a frame takes
from source to destination and back.