Filter
Top Products
Chapter 2 Managing Fabrics 53
Enabling SNMP Configuration
To enable SNMP configuration, do the following:
1. Choose one of the following:
■ On the faceplate display, open the Switch menu and select SNMP Properties to
open the SNMP Properties dialog. In the SNMP Configuration area, select the
SNMP Enabled option.
■ On the faceplate display, open the Switch menu and select Services to open the
System Services dialog. Select the SNMP option.
2. Click the OK button to save the change.
Enabling In-band Management
To enable In-band Management, do the following:
1. On the faceplate display, open the Switch menu and select Switch Properties to
open the Switch Properties dialog.
2. Select the In-band Management Enable option.
3. Click the OK button to save the change to the switch.