Filter
Top Products
10 Enterprise Fabric Suite 2007 User Guide • September 2008
■ Enable (default) or disable the view file auto save and load feature. Refer to
“Exiting Enterprise Fabric Suite 2007” on page 6 for more information on the
default fabric view file.
■ Enable (default) or disable the use of the Initial Start Dialog at the beginning of
an Enterprise Fabric Suite 2007 session. Refer to “Starting Enterprise Fabric
Suite 2007” on page 3 for information about the Initial Start Dialog. After a
default fabric view file is created, this setting has no effect.
■ Enable (default) or disable the Non Secure Connections Check dialog that is
displayed when you attempt to open a non secure fabric. If Display Dialog
When Making Non-secure Connections is enabled, you can open a fabric with
a non-secure fabric. Otherwise, you must have a secure connection.
■ Enable (default) or disable the Event Browser. Refer to “Displaying the Event
Browser” on page 42. If the Event Browser is enabled using the Preferences
dialog (
FIGURE 1-7), the next time Enterprise Fabric Suite 2007 is started, all
events will be displayed. If the Event Browser is disabled when Enterprise
Fabric Suite 2007 is started and later enabled, only those events from the time
the Event Browser was enabled and forward will be displayed.
■ Choose the default port view when opening the faceplate display. You can set
the faceplate to reflect the current port type (default), port speed, port
operational state, or port transceiver media. Regardless of the default port view
you choose, you can change the port view in the faceplate display by opening
the View menu and selecting a different port view option. Refer to the
corresponding subsection for more information:
■ “Displaying Port Types” on page 179
■ “Displaying Port Operational States” on page 180
■ “Displaying Port Speeds” on page 180
■ “Displaying Transceiver Media Status” on page 181