Sun Microsystems V40z Server User Manual


 
Chapter 3 Maintaining the Sun Fire V20z Server 3-21
FIGURE 3-14 Removing the SCSI Backplane
Caution – Ensure that the fan wires are not pinched when reinstalling the
backplane.
9. Before re-installing the cover on the server, check the routing of all cables for
obstructions.
3.5.5 CD-ROM/DVD-ROM/Diskette Drive Assembly
The following procedure describes how to replace the CD-ROM/DVD-ROM/
Diskette Drive assembly.
Note – Removable drives are fragile components that must be handled with care. To
prevent damage to the system, damage to a removable drive, or loss of information,
observe these precautions: Before removing a diskette drive or CD-ROM/DVD-ROM
drive, be sure that a diskette or disc is not in the drive. Be sure that the
CD-ROM/DVD-ROM tray is closed. While handling a drive, avoid touching the
connector.
1. Power off the server, including any attached peripherals, and disconnect the
server from the electrical outlet.
Refer to “Powering Off the Server and Removing the Cover” on page 3-2.
2. Unfasten the CD-ROM/DVD-ROM/Diskette Drive ribbon cables from the
motherboard (see
FIGURE 3-15).
Caution – Use care with the small flat cables. They are extremely fragile.