Toshiba 353 All in One Printer User Manual


  Open as PDF
of 302
 
4 - 10
4
e-STUDIO350/352/353/450/452/453
GENERAL OPERATION
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
• Exit sensor detects jamming of the trailing edge of paper.
↓
Registration clutch OFF
↓
Less than 1.116 sec.
Exit sensor OFF
If the exit sensor is not turned OFF after
1.116 seconds,
↓
Paper jam (E020)
→
The copying operation is stopped.
• Immediately after the power ON
↓
Any of all sensors on paper transport path detects paper (ON)
↓
Paper jam (E030)
• Front cover is opened during copying
↓
Paper jam (E410)
• Registration sensor detects jamming of the leading edge of paper:
↓
RegistrationsensorisnotturnedONinaxedperiodoftimeaftertheleadingedgeof
paper passed the transport roller.
↓
Paper jam (E120, E200, E210, E300, E330 and E3C0)
• During paper feeding from ADU:
RegistrationsensorisnotturnedONinaxedperiodoftimeaftertheADUclutchisturned
ON.
↓
Paper jam (E110)
• During paper transporting from ADU:
ADUentrance/exitsensorsdonotdetectthepaperatthexedtiming
↓
Paper jam (E510 or E520)
Registration clutch
Exit sensor
Timer
0
Paper jam (E020)
ON
OFF
1.116sec.
Fig. 4-302
04/01
 previous next