Filter
Top Products
3 - 3 e-STUDIO350/352/353/450/452/453
COPY PROCESS
3
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
(3) Data reading (scanning)
Data reading is the process of illuminating
the original with light and converting the
reectedlightintoelectricalsignals.
Thelightreectedfromtheoriginalisdirect-
ed to the charge coupled device (CCD) and
this optical image information is converted
into electrical signals (image signals), which
are then transmitted to the image process-
ing section.
CCD
Image processing sec
-
tion
(4) Data writing
Data writing is the process of converting the
image signals sent from the image process-
ing section into optical signal and exposing
the drum surface with the light.
Semiconductive laser element converts
image signals transmitted from the image
processing section into optical signal (laser
emission) to expose the drum surface and
form an electrostatic latent image on it.
Image
processing
section
LDR board
Semiconductive
laser element
Polygonal mirror
Photo-
conductive
drum
Fig. 3-204
Fig. 3-206
(Example)
CCD light
receiving
amount
Value of image
signals to be out-
put
Light 255
Dark 0
Difference between "light
" and "dark" is divided into
256 steps.
Fig. 3-205