Filter
Top Products
2 - 34
2
2
e-STUDIO350/352/353/450/452/453
OUTLINE OF THE MACHINE
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
(4) Release all the harnesses from the harness
clamps and holders on the case.
(5) Remove 5 screws and take off the LGC
board with the whole case.
Fig. 2-528
Fig. 2-529
[B] Hard disk / HDD cooling fan
(B-1) e-STUDIO350/450
(1) Take off the rear cover ( Chapter 2.5.1
[C]).
(2) Loosen 9 screws and take off the SYS board
upper cover.
Fig. 2-530
Fig. 2-531
(3) Disconnect 2 connectors.
(4) Loosen 5 screws and take off the hard disk
with the whole SYS board lower cover.
05/11