Toshiba 353 All in One Printer User Manual


  Open as PDF
of 302
 
e-STUDIO350/352/353/450/452/453
CONTROL PANEL
5
5 - 5
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
No. Message State of equipment Note
40 Place the blank
sheets in bypass tray
and select the paper
size
Displayed when no paper is in the selected
feeder at Cover Copying Mode
41 Place the blank
sheets in the same
direction as the
originals
Displayed when the direction of cover page
is different from that of other pages at Cover
Copying Mode
42 Place the same size
blank sheets as the
originals
Displayed when the paper size of cover
page is different from that of other pages at
Cover Copying Mode
43 Place insertion
sheets in the bypass
tray and select the
paper size
Displayed when no insertion sheet is in the
selected drawer at Sheet Insertion Mode
44 Select the same size
insert1 sheets as the
originals
Displayed when the size of insertion sheet
(sheet 1) is different from that of other
pages at Sheet Insertion Mode
45 Select the same size
insert2 sheets as the
originals
Displayed when the size of insertion sheet
(sheet 2) is different from that of other
pages at Sheet Insertion Mode
46 Set insert1 sheets in
the same direction
as the originals
Displayed when the direction of insertion
sheet (sheet 1) is different from that of other
pages at Sheet Insertion Mode
47 Set insert2 sheets in
the same direction
as the originals
Displayed when the direction of insertion
sheet (sheet 2) is different from that of other
pages at Sheet Insertion Mode
48 Settransparencylm
in A4/LT direction
Displayed when the selected paper size is
other than A4/LT at OHP mode
49 CHECK PAPER IN
LARGE CAPACITY
FEEDER
Papers in LCF are set incorrectly
50 CANNOT PUNCH
THIS SIZE PAPER
Displayed when the selected paper size is
notspeciedforholepunching
51 Remove paper from
thenisher
Displayed when the paper sizes are mixed
at Staple Sorting Mode
52 Cannot staple this
size
Displayed when the paper size is not
speciedforstaplingatStapleSortingMode
53 Remove paper from
the saddle stitch unit
Finisher is full of papers
54 Examine stapler Troubleinthestaplerunitinnisher
55 Check staple
cartridge
Nostaplerinnishersection
56
Check staple cartridge
in the saddle stitch unit
No stapler in saddle stitch unit
57 Job interrupted job 1
saved
Interrupt copying is accepted
58 Ready to resume job
1
Interruptcopyingiscancelled(nished)
 previous next