Filter
Top Products
e-STUDIO350/352/353/450/452/453
DRUM RELATED SECTION
11
11 - 15
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
[H] Toner bag full detection sensor
(H-1) Toner bag full detection sensor-1
(1) Take off the rear cover ( Chapter 2.5.1
[C]).
(2) Take off the registration clutch and gear unit
( Chapter 10.4 [B] [C]).
(3) Disconnect 1 connector and remove 1
screw. Then take off the toner bag full detec-
tion sensor-1 with the whole bracket.
(3) Take off the discharge LED.
[G] Discharge LED
(1) Take off the developer unit and cleaner unit
( Chapters 12.5 [A] and 11.6 [A]).
(2) Disconnect 1 connector and remove 1
screw. Then take off the discharge LED unit.
Fig. 11-623
Fig. 11-624
Fig. 11-625
1
2
(4) Disconnect 1 connector and take off the
toner bag full detection sensor-1 from the
bracket.
Fig. 11-626