Toshiba 353 All in One Printer User Manual


 
14 - 13
14
e-STUDIO350/352/353/450/452/453
AUTOMATIC DUPLEXING UNIT
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
[E] ADU cover
(1) Take off the ADU, ADU inside rear cover,
ADU opening / closing switch, and paper
guide ( Chapter 14.5 [A] to 14.5 [D]).
(2) Remove 4 screws and take off the ADU
cover.
Fig. 14-511
[D] Paper guide
(1) Take off the ADU ( Chapter 14.5 [A]).
(2) Release the fulcrum on the front side and
take off the paper guide.
[F] Rear latch
(1) Take off the ADU, ADU inside rear cover,
ADU opening / closing switch, paper guide,
and ADU cover ( Chapter 14.5 [A] to 14.5
[E]).
(2) Remove the spring.
Fig. 14-512
Paper guide
Screw
ADU cover
Screw
Spring
Fig. 14-510
[C] ADU opening / closing switch
(1) Take off the ADU ( Chapter 14.5 [A]).
(2) Take off the ADU inside rear cover
( Chapter 14.5 [B]).
(3) Disconnect the connector and release the
latch to take off the ADU opening / closing
switch.
Fig. 14-509
ADU opening/
closing switch