Filter
Top Products
2 - 29
2
e-STUDIO350/352/353/450/452/453
OUTLINE OF THE MACHINE
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-512
[G] Upper rear cover
(1) Take off the RADF or platen cover.
(2) Take off the left upper cover ( Chapter
2.5.1 [D]).
(3) Take off the right upper cover ( Chapter
2.5.1 [F]).
(4) Remove 2 screws and upper rear cover.
Fig. 2-509
Fig. 2-510
Fig. 2-511
[D] Left upper cover
(1) Remove 2 screws and take off the left upper
cover.
[E] Front upper cover
(1) Take off the left upper cover ( Chapter
2.5.1 [D]).
(2) Remove 2 screws and take off the front up-
per cover.
[F] Right upper cover
(1) Remove 3 screws and take off the right up-
per cover.