Filter
Top Products
9 - 12
9
e-STUDIO350/352/353/450/452/453
PAPER FEEDING SYSTEM
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
(A-3) SFB board
(1)
Take off the bypass unit ( Chapter 9.4 (A-1)).
(2) Take off the hinge assembly ( Chapter 9.4
(A-2)).
(3) Remove 3 screws, 4 latches and 3 hooks,
and take off bypass tray upper cover.
(4) Remove 1 screw and take off the plate
spring.
(5) Remove 1 screw on the tray side and take
off the bracket.
Note:
Install the bracket so that its pointer is
placed at the same position as before.
Fig. 9-409
Fig. 9-411
Hinge assembly
Screw
Bracket
Plate
spring
(4) Pull out the hinge assembly from the bypass
tray.
Fig. 9-410
Screw
Bypass tray
upper cover
Fig. 9-412
Pointer