Filter
Top Products
2 - 35
2
e-STUDIO350/352/353/450/452/453
OUTLINE OF THE MACHINE
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Fig. 2-532
(5) Remove 4 screws and take off the hard disk.
Fig. 2-533
Fig. 2-534
Fig. 2-535
(B-2) e-STUDIO352/353/452/453
(1) Take off the rear cover-1.
( chapter 2.5.1[C])
(2) Disconnect 1 connector. Release the har-
ness from harness clamps.
(3) Loosen 10 screws and take off the SYS
board cover.
(4) Disconnect 2 connectors.
07/11
SYS board cover