Toshiba 353 All in One Printer User Manual


  Open as PDF
of 302
 
1 - 8
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
1
e-STUDIO350/352/353/450/452/453
SPECIFICATIONS
Notes:
1.Thebridgekit(KN-3520)isnecessaryforinstallationofthenisher(MJ-1022,MJ-1023/1024
or MJ-1101).
2.Thenisher(MJ-1023/1024)isnecessaryforinstallationoftheholepunchunit(MJ-6004N/
E/F/S).Thenisher(MJ-1101)isnecessaryforinstallationoftheholepunchunit(MJ-6101N/
E/F/S).
3. The PCI slot (GO-1060) is necessary for the installation of the scrambler board (GP-1040).
4. The antenna (GN-3010) is necessary to enable the wireless LAN module (GN-1041) and
Bluetooth module (GN-2010).
5. When the wireless LAN module (GN-1041) and the Bluetooth module (GN-2010) are in-
stalled, only 1 antenna (GN-3010) can be connected to each.
6. The Printer kit (GM-1060) or Printer/Scanner kit (GM-2060) does not have a function for
printinganXPSle.
7. To enable an XPS file to be printed by the Printer kit (GM-1061) or Printer/Scanner kit
(GM-2061), the Memory (GC-1230) is required to be installed.
8.To enableanXPSletobeprintedbythePrinterELK(GM-1120)orPrinter/ScannerELK
(GM-2120), the Memory (GC-1230) is required to be installed.
07/11
 previous next