Toshiba 353 All in One Printer User Manual


  Open as PDF
of 302
 
13 - 9
e-STUDIO350/352/353/450/452/453
FUSER UNIT / PAPER EXIT SECTION
13
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
(4) Temperature control at Energy Saving Mode
This equipment has the following two types of temperature control for saving energy and returns
to ready status to perform printing in each mode upon printing request.
The period of time from the printing request to this mode can be set in “Setting Mode (08)” or by
an administrator.
Administrator setting procedure:
[USER FUNCTIONS] button
→
[ADMIN] (input of administrator’s password)
→
[GENERAL]
→
[ENERGY SAVER]
Auto Power Save Mode (Setting Mode (08-205)):
Whentheprintingisnotperformedinaspeciedperiodoftime(defaultsetting:15min.)afterthe
previous printing is completed, the equipment enters to Auto Power Save Mode to turn OFF the
IH coil.
Auto Shut Off Mode (Setting Mode (08-206)):
Whentheprintingisnotperformedinaspeciedperiodoftime(defaultsetting:60min(e-STU-
DIO350), 90 min (e-STUDIO450)). after the equipment entered to Auto Power Save Mode, the
equipment then enters to Auto Shut Off Mode to turn OFF the IH coil.
Fig. 13-405
OFF
Warming-up Ready During printing Fixed time
(
08-205
)
Fixed time
(
08-206
)
Auto Power Save Mode
(
IH coil OFF
)
Auto
Shut Off
Mode
°C
200
0
Temperature
of fuser roller
IH coil ON
 previous next